FAQ
If you have more inquiry,
please don’t hesitate to contact us!
If you have more inquiry,
please don’t hesitate to contact us!
Clean and pretreat the surface with NanoEL AB Primer:
Spray the surface 2-3 times (2 x spray for A4 size surface).
Smoothly wipe the surface with a non–fuzzing tissue, until the liquid is dry (just a few seconds).
Coating with NanoEL AB Pro:
Spray the surface 2 times with NanoEL AB Pro (2 x spray for A4 size surface).
Gently wipe the cleaned surface until the liquid is dry (just a few seconds).
Please do not touch the coated surface during curing time. Activation of antimicrobial and antivirus effect starts after 30 min
(we recommend 6 hours curing time for best results & long-lasting effect).
Spray NanoEL AB Textile 10 on a soft surface that you want to coat (like clothes, carpet, floor mat, car mat, textile, linen of bed, and many more).
Please do not touch until the coated surface is dry. Wait approximately 30 min depending on the textile thickness until the coated fiber remain dry.
(you can decrease the drying time by household hairdryer)
(we recommend 6 hours curing time for best results).
NanoEL AB Surface Solution 365 comes in a set of two spray bottles, tissue and gloves are also included. The application time only takes 5 minutes. NanoEL AB Textile Solution 10 comes in a spray bottle. Fast application and quick drying.
Strong disinfecting properties against:NanoEL AB is a multifunctional coating.
The surface application areas are unlimited. The coating thickness is very thin: only 150-300 nm, so it doesn’t change the surface appearance or its properties.
Cost reduction and time-saving technology since the coating must only be applied once.
Long-lasting and effective formula – for at least one year. (NanoEL AB Surface Solution) Environmentally friendly and halogen-free technology (free of fluorine, PBT/vPvB- & SVHC substances).
NanoEL AB is not hazardous to the human skin and body. The dermatological test graded our product with “Excellent” and the food contact test meets the requirements for “Food Articles and Material” of the EU commission.
The coating is invisible and does not affect the original surface color.
It is available for both the private consumer application as well as for the industrial sector. NanoEL AB prevents the development of odor (caused by microbes).
We do not have a test report for Sars-CoV-2 (COVID-19) yet but we have tested the activity of NanoEL AB on the Sars-CoV-1 and Influenza-A1-H1N1. Besides close contact from person to person, it is possible to get contaminated by hand to surface to hand transfer. Here our coating decreases the infection source by protecting the surface of the activity of microbes.
NanoEL AB creates physical protection against viruses, bacteria, fungi, including the Influenza A1 virus and the Sars-CoV-1. Both Sars-CoV-1 and Sars-CoV-2 (COVID-19) are coronaviruses. The virus that causes SARS is known as SARS-CoV-1, whilst the virus that causes COVID-19 is known as SARS-CoV-2.
According to health experts, the COVID-19 virus is almost genetically identical to the SARS virus (TGEV virus is the standard virus for testing and evaluation of SARS-Corona). Both viruses have structural similarity, transmission, and other related properties, therefore it is expected that both act in a similar way.